Ikon bayarwa
| Ƙarfin allo mai ƙarfi | |
| Adadin yadudduka: | 1-42 yadudduka |
| Abu: | FR4 \ high TG FR4 \ Gubar kyauta kayan \ CEM1 \ CEM3 \ Aluminum \ Metal core \ PTFE \ Rogers |
| Out Layer Cu kauri: | 1-6OZ |
| Ciki Layer Cu kauri: | 1-4OZ |
| Matsakaicin wurin sarrafawa: | 610*1100mm |
| Mafi qarancin kauri: | 2 yadudduka 0.3mm (mil 12) 4 yadudduka 0.4mm (mil 16) 6 yadudduka 0.8mm (32mil) 8 yadudduka 1.0mm (mil 40) 10 Layer 1.1mm (44mil) 12 yadudduka 1.3mm (52mil) 14 Layer 1.5mm (59mil) 16 yadudduka 1.6mm (mil 63) |
| Mafi qarancin Nisa: | 0.076mm (mil 3) |
| Mafi ƙarancin sarari: | 0.076mm (mil 3) |
| Mafi qarancin girman rami (ramin ƙarshe): | 0.2mm ku |
| Matsayin al'amari: | 10:1 |
| Girman ramin hakowa: | 0.2-0.65mm |
| Haƙurin hakowa: | +\-0.05mm(mil) |
| Haƙuri na PTH: | Φ0.2-1.6mm +\-0.075mm (3mil) Φ1.6-6.3mm+\-0.1mm(4mil) |
| Haƙurin NPTH: | Φ0.2-1.6mm +\-0.05mm(2mil) Φ1.6-6.3mm+\-0.05mm(2mil) |
| Gama haƙurin allo: | Kauri | 0.8mm, Haƙuri:+/- 0.08mm |
| 0.8mm≤Kauri≤6.5mm,Haƙuri+/-10% | |
| Gada mafi ƙarancin soldermask: | 0.076mm (mil 3) |
| Juyawa da lankwasawa: | ≤0.75% Min0.5% |
| Matsayi na TG: | 130-215 ℃ |
| Haƙuri na rashin ƙarfi: | +/-10%, Min+/-5% |
| Maganin Sama:
| HASL, LF HASL |
| Zinare nutsewa, Zinare Flash, Yatsa na Zinari | |
| Azurfa Immersion, Tin Immersion,OSP | |
| Zaɓin Platin Zinare, Kauri na Zinare har zuwa 3um (120u”) | |
| Buga Carbon, S/M mai Peelable, ENEPIG | |
| Ƙarfin allon aluminum | |
| Adadin yadudduka: | Single Layer, yadudduka biyu |
| Matsakaicin girman allo: | 1500*600mm |
| Kaurin allo: | 0.5-3.0mm |
| Kaurin jan karfe: | 0.5-4oz |
| Mafi qarancin girman rami: | 0.8mm ku |
| Mafi ƙarancin faɗi: | 0.1mm |
| Mafi ƙarancin sarari: | 0.12mm |
| Girman kushin mafi ƙarancin: | 10 micron |
| Ƙarshen saman: | HASL, OSP, ENIG |
| Siffata: | CNC, Punching, V-yanke |
| Kayan aiki: | Gwajin Duniya |
| Buɗewa/Gajeren Gwajin Flying Probe | |
| Microscope mai ƙarfi | |
| Kit ɗin Gwajin Solderability | |
| Gwajin Ƙarfin Kwasfa | |
| Buɗe High Volt & Short Tester | |
| Kit ɗin Gyaran Sashen Ketare Tare da Polisher | |
| FPC Capacity | |
| Yadudduka: | 1-8 yadudduka |
| Kaurin allo: | 0.05-0.5mm |
| Kaurin jan karfe: | 0.5-3OZ |
| Mafi qarancin Nisa: | 0.075mm |
| Mafi ƙarancin sarari: | 0.075mm |
| A cikin girman rami: | 0.2mm ku |
| Mafi qarancin girman rami na Laser: | 0.075mm |
| Mafi ƙarancin girman ramin naushi: | 0.5mm ku |
| Hakuri na soldermask: | + 0.5mm |
| Mafi qarancin juriyar juriya: | + 0.5mm |
| Ƙarshen saman: | HASL, LF HASL, Azurfa Immersion, Zinare na Immersion, Zinare Filashi, OSP |
| Siffata: | Punching, Laser, Yanke |
| Kayan aiki: | Gwajin Duniya |
| Buɗewa/Gajeren Gwajin Flying Probe | |
| Microscope mai ƙarfi | |
| Kit ɗin Gwajin Solderability | |
| Gwajin Ƙarfin Kwasfa | |
| Buɗe High Volt & Short Tester | |
| Kit ɗin Gyaran Sashen Ketare Tare da Polisher | |
| Ƙarfin ƙarfi & sassauci | |
| Yadudduka: | 1-28 yadudduka |
| Nau'in kayan aiki: | FR-4 (Babban Tg, Halogen Kyauta, Babban Mita) PTFE, BT, Getek, Aluminum tushe, Copper tushe, KB, Nanya, Shengyi, ITEQ, ILM, Isola, Nelco, Rogers, Arlon |
| Kaurin allo: | 6-240mil/0.15-6.0mm |
| Kaurin jan karfe: | 210um (6oz) na ciki Layer 210um (6oz) don Layer na waje |
| Girman aikin injin injin: | 0.2mm/0.08" |
| Matsayin al'amari: | 2:1 |
| Matsakaicin girman panel: | Sigle gefen ko biyu tarnaƙi: 500mm * 1200mm |
| Multilayer yadudduka: 508mm x 610mm (20 ″ x 24 ″) | |
| Nisa / sarari Min layi: | 0.076mm / 0.076mm (0.003 ″ / 0.003 ″) / 3mil/3mil |
| Ta nau'in rami: | Makaho / Binne / Plugged (VOP, VIP…) |
| HDI / Microvia: | EE |
| Ƙarshen saman: | HASL, LF HASL |
| Zinare nutsewa, Zinare Flash, Yatsa na Zinari | |
| Azurfa Immersion, Tin Immersion,OSP | |
| Zaɓin Platin Zinare, Kauri na Zinare har zuwa 3um (120u”) | |
| Buga Carbon, S/M mai Peelable, ENEPIG | |
| Siffata: | CNC, Punching, V-yanke |
| Kayan aiki: | Gwajin Duniya |
| Buɗewa/Gajeren Gwajin Flying Probe | |
| Microscope mai ƙarfi | |
| Kit ɗin Gwajin Solderability | |
| Gwajin Ƙarfin Kwasfa | |
| Buɗe High Volt & Short Tester | |
| Kit ɗin Gyaran Sashen Ketare Tare da Polisher | |
